Effect of Porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures

This article investigates the influence of porosity on free and forced vibration characteristics of a nanoshell reinforced by graphene platelets (GPL). The material properties of piece-wise graphene-reinforced composites (GPLRCs) are assumed to be graded in the thickness direction of a cylindrical nanoshell and estimated using a nanomechanical model. In addition, because of imperfection of the current structure, three kinds of porosity distributions are considered. The nanostructure is modeled using modified strain gradient theory (MSGT) which is a size-dependent theory with three length scale parameters. The novelty of the current study is to consider the effects of porosity, GPLRC and MSGT on dynamic and static behaviors of the nanostructure. Considering three length scale parameters ( $l_0=5h$, $l_1=3h$, $l_2=5h$ ) in MSGT leads to a better agreement with MD simulation in comparison by other theories. Finally, effects of different factors on static and dynamic behaviors of the porous nanostructure are examined in detail.     

A non-contact method for part-based process performance monitoring in end milling operations

Surface response to excitation (SuRE) method was originally developed for structural health monitoring (SHM) applications. SuRE was used to evaluate the performance of completed milling operations. The method generates surface waves on the plate and studies the spectrum changes at selected points to detect defects and change of compressive forces. In this study, the length, depth, and width of a slot were changed step by step. The surface of the aluminum plate was excited in the 20–400 kHz range with a piezoelectric element. A laser scanning vibrometer was used to monitor the vibrations at the predetermined grid points after the dimensions of the slot were changed methodically. The frequency spectrums of measured vibrations were calculated by using the Fast Fourier Transformation (FFT). The sums of the squares of the differences (SSD) of the spectrums were calculated to evaluate the change of the spectrums. The SuRE method was able to determine if the dimensions were changed in each case at all the selected points. The scanning laser vibrometer is not feasible to be used at the shop floor. However, the study demonstrated that a piezoelectric element attached to any of the grid points would be able to evaluate the completed machining process.     

Process Optimization,Physical Properties,and Environmental Stability of an α-Tocopherol Nanocapsule Preparation Using Complex Coacervation Method and Full Factorial Design

α-Tocopherol (α-Toc) has valuable biological activity, but its activity is limited when exposed to environmental factors. Nanocapsules can be used to overcome this problem. Using nanocapsules in the range of 100–200 nm is more beneficial. A 2⁴ full factorial design was carried out to optimize the size of nanocapsules using the complex coacervation method. The four factors were the amount of the wall material, the ratio of core material to wall material, the pH of the solution, and the speed of the homogenizer. The smallest nanocapsules (176 nm) were obtained at a wall content (gelatine and pectin) of 0.8 mg, a percentage of core material (α-Toc) to wall material of 20%, a pH = 4.5, and a homogenizer speed of 12,000 rpm. The encapsulation efficiency was 90.6 ± 1.1%, and the encapsulation yield was 83.4 ± 1.6%. Assessment of the stability of α-Toc after 1 month showed that encapsulation could improve its stability in the presence of three influential factors: humidity, light, and temperature.     

Synthesis of Ion Imprinted Polymers by Copolymerization of Zn(II) and Al(III)8-hydroxy Quinolone Complexes with Divinylbenzene and Methacryclic Acid

In this research work, Zinc(II) and Aluminum(III)-IIP's were synthesized by optimizing the amount of methacrylic acid as monomer, divinylbenzene as cross-linker. The IIP's were functionalized with 8-hydroxy quinolone complexes of the two metal ions under thermal conditions by copolymerization with monomer and cross-linker. The IIP's and Non-IIP's were characterized using FT-IR, TGA, and SEM analysis. A quite remarkable difference in the size was observed of the polymers (Zn(II) 1.0 µm and Al(III) 0.1 µm). A stronger affinity was observed with IIP in comparison with Non-IIP at pH 3.1 and 4.5 for Zn(II) and Al(III) ions on their respective polymers.     

Energy Efficient Cloud Service Provisioning: Keeping Data Center Granularity in Perspective

The cost of power and its associated delivery are becoming significant factors in the total expenditure of large-scale data centers. Numerous techniques have been proposed to address the energy efficiency issue in cloud systems. Recently, some efforts have been made to decentralize the cloud via distributing data centers in diverse geographical positions, at different scales. In this paper, we elaborate on the energy effectiveness of service provisioning on different cloud architectures, from a mega-data center to a nano data center, which provides the extreme decentralization in terms of cloud architecture, as well as P2P-clouds or community network clouds. We study the energy consumption through an analytical and simulation framework for video streaming and MapReduce applications.     

Recent developments in catalyst synthesis using DBD plasma for reforming applications

The catalyst has a significant role in gas processing applications such as reforming technologies for H₂ and syngas production. The stable catalyst is requisite for any industrial catalysis application to make it commercially viable. Several methods are employed to synthesize the catalysts. However, there is still a challenge to achieve a controlled morphology and pure catalyst which majorly influences the catalytic activity in reforming applications. The conventional methods are expansive, and the removal of the impurities are major challenges. Nevertheless, it is not straightforward to achieve the desired structure and stability. Therefore, significant interest has been developed on the advanced techniques to take control of the physicochemical properties of the catalyst through non-thermal plasma (NTP) techniques. In this review, the systematic evolution of the catalyst synthesis using NTP technique is elucidated. The emerging DBD plasma to synthesized and effective surface treatment is reviewed. DBD plasma synthesized catalyst performance in reforming application for H₂ and syngas production is summarised. Furthermore, the status of DBD plasma for catalyst synthesis and proposed future avenues to design environmentally suitable and cost-effective synthesis techniques are discussed.     

A new predictor parameter for production rate of ornamental stones

Bulletin of Engineering Geology and the Environment - In this study, a new predictor parameter (NPP), which is based on the product of uniaxial compressive strength (UCS) and Mohs hardness (MH),...     

Synthesis and characterisation of fluorescent pyrene‐end‐capped polylactide fibres

Fluorescent markers are critical for tracking the position and movement of molecules both in vivo and in vitro. Conventionally, synthetic dyes are non‐covalently added to polymers for fluorescent tracking, but often diffuse away. Here we demonstrate, for the first time, a facile method for the synthesis of fluorescent poly(lactic acid) nano‐/microfibres for biomedical applications using solution spin blowing. Pyrene‐end‐capped poly(l ‐lactide) (PLLA) derivatives were synthesised using the ring‐opening polymerisation of l ‐lactide and they were characterised using spectroscopic and thermal analyses. Submicrometre‐sized fluorescent fibres were produced from these PLLA derivatives using solution blow spinning techniques generating polymer blends and core–shell fibres. Such system could be further exploited to incorporate electrically conductive carbon allotropes via the pyrene aromaticity, producing fluorescent and electrically active fibres for in vitro monitoring and electrical stimulation. © 2018 Society of Chemical Industry